- Genome Browser
- My Data
- About Us
This is a UCSC Genome Browser Mirror hosted by the Genetics and Genomics Analysis Platform
About GenAP - GenAP Pipelines - GenAP public Galaxy - Epigenomes IHEC Data Portal
The Genome Browser in the Cloud (GBiC) program is a convenient tool that automates the setup of a UCSC Genome Browser mirror. The GBiC program is for users who want to set up a full mirror of the UCSC Genome Browser on their server/cloud instance, rather than using Genome Browser in a Box (GBIB) or our public website. Please see the Installation of a UCSC Genome Browser on a local machine (mirror) page for a summary of installation options, including the pros and cons of using a mirror installation via the GBiC program vs. using GBiB.
The program works by setting up MySQL, Apache, and Ghostscript, and then copying the Genome
Browser CGIs onto the machine under
/usr/local/apache/. Because It also deactivates the default
Apache htdocs/cgi folders, it is best run on a new machine, or at least a host that is not
already used as a web server. The tool can also download full or partial assembly databases,
update the Genome Browser CGIs, and remove temporary files (aka "trash cleaning").
The GBiC program has been tested with Ubuntu 14/16 LTS, Centos 6/6.7/7.2, and Fedora 20.
It has also been tested on virtual machines in Amazon EC2 (Centos 6 and Ubuntu 14) and Microsoft Azure (Ubuntu). If you want to load data on the fly from UCSC, you need to select the data centers "US West (N. California)" (Amazon) or "West US" (Microsoft) for best performance. Other data centers (e.g. East Coast) will require a local copy of the genome assembly, which requires 2TB-7TB of storage for the hg19 assembly. Note that this exceeds the current maximum size of a single Amazon EBS volume.
Download the GBiC program from the UCSC Genome Browser store.
Run the program as root, like this:
sudo bash browserSetup.sh install
install command downloads and configures Apache, MySQL and Ghostscript, copies the Genome Browser
CGIs, and configures the mirror to load data remotely from UCSC. The
install command must be
run before any other command is used.
For an installation demonstration, see the Genome Browser in the Cloud (GBiC) Introduction video.
For mirror-specific help, please contact the Mirror Forum as listed on our contact page.
The GBiC program downloads the Genome Browser CGIs and sets up the central MySQL database. All
potentially destructive steps require confirmation by the user (unless the
batch mode option is specified).
In particular, MySQL and Apache are installed and set up with the right package
manager (yum or apt-get). A default random password is set for the
MySQL root user and added to the
~/.my.cnf file of the Unix root account.
If you have already set up MySQL, you must create the
~/.my.cnf file. The program will detect this and create a template file for you.
The program also performs some minor tasks such as placing symlinks, detecting
MariaDB, deactivating SELinux, finding the correct path for your Apache install
and adapting the MySQL socket config.
This will result in a Genome Browser accessible on localhost that loads its data through genome-mysql.soe.ucsc.edu:3306 and hgdownload.soe.ucsc.edu:80. If your geographic location is not on the US West Coast, the performance will be too slow for normal use, though sufficient to test that the setup is functional. You can then use the program to download assemblies of interest to your local Genome Browser, which will result in performance at least as fast as the UCSC site.
The first argument of the program is called
command in the following section of this document.
The first command that you will need is
install, which installs the Genome Browser dependencies,
binary files and basic MySQL infrastructure:
sudo bash browserSetup.sh install
There are a number of options supported by the GBiC program. In all cases, options must be specified before the command.
The following example correctly specifies the batch mode option to the program:
sudo bash browserSetup.sh -b install
To improve the performance of your Genome Browser, the program accepts the command
minimal. It will download the minimal tables required for reasonable
performance from places in the US and possibly others, e.g., from
Japan. Call it like this to trade space for performance and download a few
of the most used MySQL tables for hg38:
sudo bash browserSetup.sh minimal hg38
If the Genome Browser is still too slow, you will have to mirror all tables of a
genome assembly. By default, rsync is used for the download. Alternatively you can use
UDR, a UDP-based fast transfer protocol (option:
sudo bash browserSetup.sh -u mirror hg38
A successful run of
mirror will also cut the connection to UCSC: no tables
or files are downloaded on-the-fly anymore from the UCSC servers. To change
the remote on-the-fly loading, specify the option
-o (offline) or
-f (on-the-fly). If you are planning to keep sensitive data on your mirror,
you will want to disable on-the-fly loading, like so:
sudo bash browserSetup.sh -o
The full assembly download for hg19 is >7TB. Limit this
to 2TB or less with the
sudo bash browserSetup.sh -t noEncode mirror hg19
For a full list of
-t options, see the All GBiC options section or run the
program with no arguments.
To update all CGIs and fully mirrored assemblies, call the
tool with the
update parameter like this:
sudo bash browserSetup.sh update
Minimal mirror sites (those that have partially mirrored an assembly) should not
update command, but rather just rerun the
minimal command, so that only the minimal
tables are updated. For instance, if you have partially mirrored the hg19 and hg38 databases,
you may want to add this command to your crontab, perhaps running it every day, to keep your local
tables in sync with those at UCSC:
sudo bash browserSetup.sh minimal hg19 hg38
To update only the Genome Browser software and not the data, use the
sudo bash browserSetup.sh cgiUpdate
Software may break or not work correctly if the necessary data is not available.
Thus in most circumstances we recommend you use the
minimal commands instead
You will also want to add a cleaning command to your crontab to remove
the temporary files that are created during normal Genome Browser usage. These accumulate
/usr/local/apache/trash and can quickly consume significant space. A command like
this should be added to your crontab file:
sudo bash browserSetup.sh clean
If you find that you need the Kent command line utilities in addition to the Genome Browser, the
addTools command will install all the utilities into
sudo bash browserSetup.sh addTools
A majority of these utilities require an
.hg.conf file in the users home directory. For
an example of a minimal
.hg.conf file, click
If you find a bug, or if your Linux distribution is not supported, please contact email@example.com.
More details about the Genome Browser installation are available here.
Here is the full listing of commands and options supported by the GBiC program:
browserSetup.sh [options] [command] [assemblyList] - UCSC genome browser install script command is one of: install - install the genome browser on this machine. This is usually required before any other commands are run. minimal - download only a minimal set of tables. Missing tables are downloaded on-the-fly from UCSC. mirror - download a full assembly (also see the -t option below). No data is downloaded on-the-fly from UCSC. update - update the genome browser software and data, updates all tables of an assembly, like "mirror" cgiUpdate - update only the genome browser software, not the data. Not recommended, see documentation. clean - remove temporary files of the genome browser older than one day, but do not delete any uploaded custom tracks addTools - copy the UCSC User Tools, e.g. blat, featureBits, overlapSelect, bedToBigBed, pslCDnaFilter, twoBitToFa, gff3ToGenePred, bedSort, ... to /usr/local/bin parameters for 'minimal', 'mirror' and 'update': <assemblyList> - download MySQL + /gbdb files for a space-separated list of genomes examples: bash browserSetup.sh install - install Genome Browser, do not download any genome assembly, switch to on-the-fly mode (see the -f option) bash browserSetup.sh minimal hg19 - download only the minimal tables for the hg19 assembly bash browserSetup.sh mirror hg19 mm9 - download hg19 and mm9, switch to offline mode (see the -o option) bash browserSetup.sh mirror -t noEncode hg19 - install Genome Browser, download hg19 but no ENCODE tables and switch to offline mode (see the -o option) bash browserSetup.sh update hg19 - update all data and all tables of the hg19 assembly (in total 7TB) bash browserSetup.sh cgiUpdate - update the Genome Browser CGI programs bash browserSetup.sh clean - remove temporary files older than one day All options have to precede the command. options: -a - use alternative download server at SDSC -b - batch mode, do not prompt for key presses -t - only download track selection, requires a value. This option is only useful for Human/Mouse assemblies. Download only certain tracks, possible values: noEncode = do not download any tables with the wgEncode prefix, except Gencode genes, saves 4TB/7TB for hg19 bestEncode = our ENCODE recommendation, all summary tracks, saves 2TB/7TB for hg19 main = only RefSeq/Gencode genes and common SNPs, total 5GB for hg19 -u - use UDR (fast UDP) file transfers for the download. Requires at least one open UDP incoming port 9000-9100. (UDR is not available for Mac OSX) This option will download a udr binary to /usr/local/bin -o - switch to offline-mode. Remove all statements from hg.conf that allow loading data on-the-fly from the UCSC download server. Requires that you have downloaded at least one assembly, using the '"download"' command, not the '"mirror"' command. -f - switch to on-the-fly mode. Change hg.conf to allow loading data through the internet, if it is not available locally. The default mode unless an assembly has been provided during install -h - this help message